Controls

¾ - to 6-inch "Y" Pattern Diaphragm Valve, Cast Iron or Cast Brass Body and Cap

Features & Benefits

• Large seat opening and high lift-disc for higher flow rates at a lower pressure loss
• Compatible with wide range of line fluids including air or water applications
• Can be actuated with either air or water as control fluid

1-inch, 1½-inch, and 2-inch "Y" pattern diaphragm valves, stainless Steel body and cap

Features & Benefits 

• Y-pattern design permits higher flow than other comparably sized diaphragm operated valves
• Larger diaphragm area compared to seat area permits drip tight closing without any springs
• Ideal for corrosive applications in paper/pulp, dairy, fuel, and water treatment industries

½-inch to 2-inch "Y" pattern diaphragm valves, glass-filled thermoplastic body and cap

Features & Benefits 

• Isolated bonnet feature physically separates line fluid from control fluid eliminating the potential to contaminate control lines with corrosive fluids
• Failsafe closed options available to keep valve closed against 30, 60, or 100 psi line pressures without control pressure
• Designed for water treatment applications including those requiring acids, caustic and harsh chemicals that would rapidly corrode metal valves

AquaMatic stagers can be controlled by programmable controllers or adjustable times.

Features & Benefits 

• Motor-driven rotary 
• Multiport pilot valve
• Controls a set of individual diaphragm valves in a predefined sequence

Provides an easily adaptable control of stagers for diaphragm valve nests. This fully programmable series of controls provide the ability to fine-tune the operation to meet application requirements.

Features & Benefits 

• Accepts an input from a variety of flow sensors to electronically monitor the amount of water used
• Up to 15 programmable timed regeneration cycle are available
• Optional battery back-up for flow monitoring during power outage

Easy Nest Kits provide a straightforward approach to water treatment, by incorporating the flexibility of Autotrol controllers and the robust design of the AquaMatic valves into a simple and effective valve nest.

Features & Benefits 

• Available in either composite or metal valve configurations
• Filter and softener configurations available
• Available with electronic or electromechanical controls

Constructed of cast iron, brass, stainless steel, and Nitrile elastomer components, giving an unparalleled service life ¾-inch through 3-inch threaded (N.P.T. or B.S.P.); 3-inch through 4-inch flanged drilled in accordance with ASA16.1 class 125, or BSP4504

Features & Benefits 

• Spring-assist (open or closed)
• Position indicator
• Limit stop for adjustable flow rate control

½-inch to 2½-inch "Y" pattern diaphragm valves, glass-filled thermoplastic body and cap

Features & Benefits 

• Separate diaphragm chambers protects the diaphragm from the flow stream, while allowing the valve to be serviced in-line
• All internal parts in contact with media are made of composite materials
• Can be actuated with either air or water as control fluid

Available in the NX48 and NX51 Series configurations, the NXT Stager Controller is easy to use and has the unique ability to fine-tune stager operation for almost every application.

Features & Benefits 

• The ability to fine-tune stager operation for almost every application
• A new intuitive interface for controlling AquaMatic valves
• Enhanced 2x16 full-text backlit display

Aquamatic Fluid Ejectors are designed for commercial applications and are constructed with chemical-resistant PVC so your softening brine or deionization regenerants can be safely drawn into the systems.

Features & Benefits 

• Min Operating Pressure 20 psi (1.37)
• Max Operating Pressure 125 psi (8.6 bars)
• Operating Temperature up to 140°F (60°)
• Body Material PVC